X Series E53 X5 4.4i (M62) OFFRD
Install reversing rail and insert screws (2 and 3).
Note:
Screws (2) with M6 thread.
Screws (3) with M7 thread.
Tighten screws (2 and 3).
Tightening torque for screws (2 and 3).
Technical Data, 11 31 10AZ
.
Note:
Engines in E53 (X5) have an external oil separator. Grub
screw (1) and angle section are not fitted.
Replace grub screw (1).
Insert grub screw only until it makes contact with angle section (1)
without play, do not tighten down.
Note:
The grub screw (1) secures the angle bracket in the cylinder
head.
Note:
The position of the camshaft adjustment unit when fitting and
feeding on the timing chain is not assigned and can be freely
selected.
Install timing chain over reversing rail, camshaft adjustment unit of
cylinder bank 5 to 8 and over crankshaft sprocket wheel.
Note:
Install timing chain inside screw-in pin (1).
RA Replacing timing chain (M62 VANOS from 9/98)
BMW AG - TIS
08.02.2013 02:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
