X Series E53 X5 4.4i (M62) OFFRD
Installation:
Installation of the left camshaft adjustment unit is described
separately from removal. Assembly sequence for removal and
installation is different.
Pull up timing chain, position camshaft adjustment unit (2) with
exhaust sprocket wheel and fitted secondary chain and feed on
timing chain (1) from front over sprocket wheel of camshaft
adjustment unit (2).
Note:
The position of the elongated holes on the exhaust sprocket wheel
is not assigned and can be freely selected.
The position of the camshaft adjustment unit (2) when feeding on
the timing chain (1) is not assigned and can be freely selected.
Position exhaust sprocket wheel (1) and camshaft adjustment
unit (2) on camshafts.
Caution!
Left-hand threads.
Insert screws (1 and 2) on cylinder bank 5 to 8 and initially
tighten without play, but do not tighten down yet.
RA Removing and installing/replacing left camshaft adjustment unit (M62 VANOS from
BMW AG - TIS
08.02.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
