X Series E53 X5 4.4i (M62) OFFRD
Note:
The continuity test with the multimeter described in the following is
not possible on the M62 B46 because of the different design of
the camshaft adjustment unit.
The remaining procedure is identical.
Attach special tool 11 6 440 to camshaft adjustment unit on
cylinder bank 1 to 4 and move at 40 Nm to left-hand stop.
Check left-hand stop of camshaft adjustment unit with acoustic
continuity test on multimeter.
Caution!
Left-hand threads.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Tighten down screw connection (2) of inlet camshaft on cylinder
bank 1 to 4.
Tightening torque, 11 36 14AZ
.
Caution!
Left-hand threads.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Tighten down screw connection (1) of exhaust camshaft on
cylinder bank 1 to 4.
Tightening torque, 11 36 13AZ
.
RA Removing and installing/replacing left camshaft adjustment unit (M62 VANOS from
BMW AG - TIS
08.02.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -