X Series E53 X5 4.4i (M62) OFFRD
Remove special tool 11 6 451 from right cylinder head on
cylinder bank 1 to 4.
Attach sensor gear (2) to cylinder bank 5 to 8.
Caution!
Left-hand threads.
Fit nut (1) of sensor gear screw connection on cylinder
bank 5 to 8 and initially tighten without play, but do not tighten
down yet.
Note:
Special tool kit 11 6 450 comprises:
Special tool 11 6 451 for cylinder bank 1 to 4
Special tool 11 6 452 for cylinder bank 5 to 8
Align locating bore (1) on sensor gear of cylinder bank 5 to 8
to positioning pin on special tool 11 6 452 . Fit special tool
11 6 452 , insert screws and initially tighten without play. Press
special tool 11 6 452 downwards and align to cylinder head.
Tighten down special tool 11 6 452 .
RA Removing and installing/replacing left camshaft adjustment unit (M62 VANOS from
BMW AG - TIS
08.02.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -
