X Series E53 X5 4.4i (M62) OFFRD
Note:
Pretensioning the timing chain moves the camshaft adjustment
unit and the unit must therefore be reset to the left-hand stop.
Attach special tool 11 6 440 to camshaft adjustment unit on
cylinder bank 5 to 8 and move at 40 Nm to left-hand stop.
Check left-hand stop of camshaft adjustment unit with acoustic
continuity test on multimeter.
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Caution!
Left-hand threads.
Tighten down screw connection (2) of inlet camshaft on cylinder
bank 5 to 8.
Tightening torque, 11 36 14AZ
.
Caution!
Left-hand threads.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Tighten down screw connection (1) of exhaust camshaft on
cylinder bank 5 to 8.
Tightening torque, 11 36 13AZ
.
RA Removing and installing/replacing right camshaft adjustment unit (M62 VANOS from
BMW AG - TIS
08.02.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
