bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Distributor On Left Camshaft Adjustment Unit (|Page 627 > < 5 RA Removing And Installing_replacing Right Camshaft Adjustment Unit (M62 VANOS From|Page 625
Page 1
background image

11 36 630

Removing and installing/replacing distributor
on left camshaft adjustment unit
(M62 VANOS from 9/98)

Removal

Removal of the camshaft adjustment unit distributor is described
separately from installation.

Remove left camshaft adjustment unit,

refer to 11 36 610.

Feed timing chain out of camshaft adjustment unit distributor.

Secure timing chain to prevent it from sliding down.

Note:

Screw (1) with sealing ring.

Release screws on camshaft adjustment unit distributor.

Note:

If the camshaft adjustment unit distributor and the seal (three
plain compression rings) are worn, the removal operation may
be awkward. 

By moving it back and forth, carefully detach distributor straight
from camshaft.

RA  Removing and installing/replacing distributor on left camshaft adjustment unit (

BMW AG - TIS

08.02.2013  02:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Distributor On Left Camshaft Adjustment Unit (|Page 627 > < 5 RA Removing And Installing_replacing Right Camshaft Adjustment Unit (M62 VANOS From|Page 625