X Series E53 X5 4.4i (M62) OFFRD
11 36 635
Removing and installing/replacing distributor
on right camshaft adjustment unit
(M62 VANOS from 9/98)
Removal
Removal of the camshaft adjustment unit distributor is described
separately from installation.
Remove right camshaft adjustment unit,
refer to 11 36 615.
Note:
After releasing, oil drips out of the solenoid valve.
Have a cleaning cloth ready.
Make sure no oil drips onto the belt drive. Remove any
remnants of oil immediately with cleaning cloth.
Release solenoid valve with special tool 11 6 420.
Feed timing chain out of camshaft adjustment unit distributor.
Secure timing chain to prevent it from sliding down.
Note:
Screw (1) with sealing ring.
Release screws on camshaft adjustment unit distributor.
RA Removing and installing/replacing distributor on right camshaft adjustment unit
BMW AG - TIS
08.02.2013 02:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
