X Series E53 X5 4.4i (M62) OFFRD
Note:
The intake air manifold is vibrationally separated from the
cylinder head by decoupling elements and gaskets.
(1)
Nut
(2)
Decoupling element
(3)
Intake air manifold
(4)
Seal
Installation:
Check seals and replace if necessary.
Caution!
Ensure that seals are correctly seated.
Installation:
Fit two decoupling elements on left and right with nuts and do
not tighten (i.e. no preload).
Align intake air manifold.
Fit all other decoupling elements with nuts and tighten
crosswise from inside to outside.
Tightening torque,
refer to Technical Data 11 61 1AZ.
RA Removing and installing intake air manifold (M62)
BMW AG - TIS
08.02.2013 02:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
