X Series E53 X5 4.4i (M62) OFFRD
12 14 611
Replacing left knock sensors (cylinder bank 5
to 8) (M62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Remove coolant manifold,
refer to 11 53 325.
Remove pipe to water pump.
Installation:
Replace sealing ring.
Caution!
Mixing up the knock sensor plug connections will result in
engine damage!
The wiring and plug connections must correspond to the
original routing. This eliminates the risk of mix-ups.
Release screws.
Tightening torque,
refer to Technical Data 12 14 2AZ.
RA Replacing left knock sensors (cylinder bank 5 to 8) (M62)
BMW AG - TIS
08.02.2013 02:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
