X Series E53 X5 4.4i (M62) OFFRD
12 42 500
Removing and installing or replacing battery
positive lead (between starter motor,
alternator and battery positive support point)
(M62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Observe safety instructions for handling vehicle battery.
Follow instructions for disconnecting and connecting battery,
refer to General Information MG 12.
Disconnect negative battery lead.
Remove reinforcement plate.
Caution!
The work step "Removing and installing reinforcement plate"
contains important installation instructions,
refer to 31 10 010.
Release screws.
Remove underbody paneling (1).
RA Removing and installing or replacing battery positive lead (between starter moto
BMW AG - TIS
08.02.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
