X Series E53 X5 4.4i (M62) OFFRD
Remove sealing caps on covers of ignition coils.
Release nuts.
Remove covers on ignition coils.
Installation:
Check profile seals (1) on left and right for damage and
correct seating, replace if necessary.
Unfasten left and right connections on ignition coils.
Disconnect thin grounding cables.
Installation:
Screw thin grounding cable to ignition coils of cylinders 2 and
7.
RA Replacing wiring harness section for engine (M62)
BMW AG - TIS
08.02.2013 02:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
