X Series E53 X5 4.4i (M62) OFFRD
Installation:
Check profile seal (1) for damage and correct seating,
replace if necessary.
Disconnect plug connection of ignition coils on left cylinder head
from ignition coils.
Installation:
Screw thin grounding strap (1) and wide grounding strap (2)
to ignition coil of cylinder 7.
Release nuts.
Disconnect cable strip (1) from fuel injectors.
Place electric changeover valve (2) together with holder to one
side.
Disconnect vacuum lines from vacuum accumulator (3).
Place vacuum accumulator (3) together with holder to one side.
Disconnect cable strip (4) from fuel injectors and place to one
side.
RA Replacing complete injection pipe (M62)
BMW AG - TIS
08.02.2013 02:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
