X Series E53 X5 4.4i (M62) OFFRD
13 54 030
Removing and installing/sealing throttle
assembly (M62)
Switch off ignition.
Remove intake hose,
refer to 13 54 250.
Disconnect plug (1).
Release screws (2).
Remove throttle assembly.
Check sealing ring (3) on throttle assembly for correct seating
and damage and replace if necessary.
Installation:
To assist installation, coat sealing ring (3) with anti-friction
rubber coating (e.g. petroleum jelly).
Check sealing ring (1) on throttle assembly (2) for damage and
replace if necessary.
RA Removing and installing/sealing throttle assembly (M62)
BMW AG - TIS
08.02.2013 03:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -