X Series E53 X5 4.4i (M62) OFFRD
17 11 031
Replacing fan cowl (M62 / M54)
M62 only:
Lever out expansion rivets (1).
Release screws (2).
Tightening torque, 13 71 3AZ.
Note:
Intake pipe is secured in intake hood by means of two retaining
lugs (1).
Retaining lugs are located under intake hood.
Press in retaining lugs (1) and remove intake hood.
Unclip water hose (1) from holder on fan cowl.
Note:
For purposes of clarity, this work step is shown on the car from
below. Underbody paneling does not have to be removed. Water
hose (1) can be pulled out of holder from above.
M54 only:
Lever out expansion rivets (1).
Remove intake hood (2).
RA Replacing fan cowl (M62 / M54)
BMW AG - TIS
08.02.2013 03:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
