X Series E53 X5 4.4i (M62) OFFRD
Caution!
The section "Removing and installing reinforcement plate"
contains important installation instructions.
Remove reinforcement plate.
Remove front splash guard.
Remove left or right heat shields.
Unclip cable of oxygen sensors.
Release stabilizer bar and slide forwards. This operation is
described in the section "Removing and installing front stabilizer".
Remove heat shield at rear.
Remove and install front propeller shaft.
Unclip vent line from transmission at holder (engine).
RA Removing and installing automatic transmission (A5S 440Z)
BMW AG - TIS
08.02.2013 03:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
