X Series E53 X5 4.4i (M62) OFFRD
Assemble special tool 00 0 200 with special tools 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and fit.
Important!
Only attach engine to relevant suspension lugs.
The supports (1) of special tool remove
00 0 208 must
make contact with the screws on the side walls.
The engine acquires a different centre of gravity, therefore
suspend special tool 11 0 000 as illustrated from special
tool 00 0 200 . Only in this way is it possible to ensure that
the engine does not hang at an angle after the front axle
carrier has been released.
Tighten down screws (1 and 2).
Release top nut from left and right engine mounts.
Raise engine with special tool 00 0 200 approx. 10 to 12 mm.
RA Removing and installing / replacing front differential (M62, N62)
BMW AG - TIS
08.02.2013 04:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -