X Series E53 X5 4.4i (M62) OFFRD
As shown in illustration, support front axle carrier with special tool
00 2 030 in conjunction with special tool 31 2 220 and a block
of wood.
Detach front axle carrier from engine carrier.
Lowering front axle:
•
Replace original screws in succession with screws of E38
front axle carrier (part number 9 900 223).
•
Screw in replaced screws (1) approx. 20 mm (axle lowers).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Front axle alignment is not required.
Tightening torque and installation instructions for front axle carrier.
Remove left engine mount.
Pull off vent hose.
RA Removing and installing / replacing front differential (M62, N62)
BMW AG - TIS
08.02.2013 04:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -