X Series E53 X5 4.4i (M62) OFFRD
Support front axle carrier with workshop jack.
Unscrew left and right bolts.
Lower workshop jack.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 31 10 1AZ
.
If necessary, remove heat shield from power steering gear.
Release banjo bolts.
Version with Servotronic: Disconnect plug connection on
Servotronic converter.
Disconnect hydraulic lines from power steering gear.
If necessary, remove hydraulic lines with bracket from power
steering gear/front axle carrier.
Remove power steering gear to left side.
Installation:
Replace sealing rings (D).
Make sure hydraulic lines are laid without tension and with
sufficient spacing to adjoining components.
Tightening torque 32 41 3AZ
.
RA Replacing power steering gear
BMW AG - TIS
08.02.2013 05:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
