X Series E53 X5 4.4i (M62) OFFRD
Loosen shear-off screw with chisel or mill off screw head.
Installation:
Fit spacer tube.
Tighten shear-off screws until heads shear off.
Unfasten all lines leading to steering column from their respective
brackets.
Release screw.
Unlock plug on ignition starter switch and disconnect.
Mechanical adjustment:
Release screws (3).
Installation:
1.
Bracket
2.
Spacer
3.
Screw
4.
Inner surfaces of plastic guide lightly greased
5.
Washer
6.
Replace self-locking nut.
Tightening torque = 8 Nm
Unfasten screws on support tube.
Remove steering column.
Installation:
1.
Screw
2.
Spacer tube
3.
Guide bush
4.
Compensating shim
RA Removing and installing steering column
BMW AG - TIS
08.02.2013 05:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -