X Series E53 X5 4.4i (M62) OFFRD
32 41 100
Removing and installing/replacing belt pulley
on vane pump for power steering
Note:
Carry out preliminary work as described in the document "
Replacing drive belt ".
Slacken screws (1)
Relieve tension on drive belt and remove from belt pulley (2).
Unscrew bolts (1) and remove belt pulley (2).
Installation:
Lettering on belt pulley (2) must point forwards.
Tightening torque 32 41 14AZ
.
RA Removing and installing/replacing belt pulley on vane pump for power steering
BMW AG - TIS
08.02.2013 05:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
