bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Lowering_raising Rear Axle Carrier|Page 1358 > < 2 RA Replacing Rear Axle Carrier
Page 1
background image

33 31 503

Lowering/raising rear axle carrier

Special tools required:

00 2 030

00 2 040

33 3 274

33 4 221

33 4 226

Necessary preliminary tasks:

Version with ride-height control: Deactivate air suspension

system and reduce pressure

M54, M67: Remove rear muffler

M57, M57TU, N62: Remove exhaust system

Release heat shield in rear area

Remove handbrake Bowden cables from holders

Remove shock absorber from swinging arm

Warning!

Danger of injury!

Failure to comply with the following instructions may result
in the vehicle slipping off the lifting platform and critically
injuring other persons.

 

When supporting components, make sure that

the vehicle can no longer be raised or lowered

the vehicle does not lift off the locating plates on the
lifting platform

If necessary, position special tool  00 2 040  with a 2nd person
helping on workshop jack  00 2 030 .

Insert special tools 33 4 221  and 33 4 226  into corresponding
mountings of special tool 00 2 040 .

Align special tool 00 2 040  to rear axle carrier.

If necessary, lower special tool  33 3 274 .

Support rear axle carrier by raising special tool 00 2 030 .

RA  Lowering/raising rear axle carrier

BMW AG - TIS

08.02.2013  06:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Lowering_raising Rear Axle Carrier|Page 1358 > < 2 RA Replacing Rear Axle Carrier