bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Overhauling Left Or Right Front-brake Caliper (brake Caliper Removed)|Page 1423 > < 3 RA Removing And Installing_replacing Left Or Right Front Brake Caliper|Page 1421
Page 1
background image

34 11 552

Overhauling left or right front-brake caliper
(brake caliper removed)

Special tools required:

34 1 133

Note:

Use repair kit,

 refer to BMW Parts Service.

Take off plastic caps (1).

Unscrew guide screws (2).

Installation:

Only clean guide screws; do not grease. Check guide bolts,
replace if necessary.

E65 and E66:

Long guide sleeve with long screw is seated on disk inlet
(bottom), short sleeve with short screw is seated on disk outlet
(top).

Tightening torque: 34 11 3AZ

Dismantle brake caliper and remove brake linings.

Installation:

Press brake lining fully outwards and insert spring (4).

RA  Overhauling left or right front-brake caliper (brake caliper removed)

BMW AG - TIS

08.02.2013  06:49

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Overhauling Left Or Right Front-brake Caliper (brake Caliper Removed)|Page 1423 > < 3 RA Removing And Installing_replacing Left Or Right Front Brake Caliper|Page 1421