bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Draining_filling Air Spring System (ride-height Control)|Page 1537 > < 7 RA Checking Air Spring Struts_air Springs For Damage
Page 1
background image

37 00 100

Draining/filling air spring system (ride-height
control)

Warning!

Danger of injury!

Drain the air spring system before carrying out any work on
the air supply unit, air reservoir, air pipes and air springs!
Danger of injury if this instruction is not complied with!

 

Risk of damage!

The vehicle must not stand on its wheels when the air springs
are depressurized! Otherwise the air spring struts will be
damaged and later destroyed during driving!

Extreme cleanliness must be ensured in the connection area
of the pipes during removal and installation. Even the smallest
of dirt particles can cause leakage in the air spring system.

Note:

Read and comply with notes on air spring system.

Deactivating air spring system:

Raise vehicle on lifting platform.

Remove ignition key.

Pull fuse for control unit

Draining air spring system:

Remove spare wheel/emergency wheel

 

Important!

Do not kink, twist or crush lines.

To avoid incorrect activation of the air springs, do mix up the
pipes at the air supply unit connection!

RA  Draining/filling air spring system (ride-height control)

BMW AG - TIS

08.02.2013  07:35

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Draining_filling Air Spring System (ride-height Control)|Page 1537 > < 7 RA Checking Air Spring Struts_air Springs For Damage