X Series E53 X5 4.4i (M62) OFFRD
Keep sealing rings (1) and (2) free of grease.
Make sure sealing rings (1) and (2) are correctly seated.
Install pneumatic spring in support with protective cap and attach
clip.
Installation:
Pull off protective cap.
Attach quick coupling (1), ensuring that snap ring (2) snaps
audibly into place.
Insert air spring in swinging arm.
Lug (1) must be located in recess of swinging arm!
Secure air spring with locking clip.
RA Removing and installing/replacing rear left or right air spring
BMW AG - TIS
08.02.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
