X Series E53 X5 4.4i (M62) OFFRD
51 16 ...
Replacing clamping element for front cup
holder
Note:
Two variants of the clamping element are possible.
A = Fitting on new part
B = Repair solution
Replacement of clamping element variant (A):
Note:
Because there are optical differences between clamping
elements (A) and (B), all clamping elements (A) must be
replaced.
Compress clamping element (A) with snipe nose pliers in
direction of arrow and feed out inwards.
Insert new clamping element (B).
Note:
Broken-out clamping elements (A) can remain in the car.
Replacement of clamping element variant (B):
Slide clamping element (B) upwards and lever out in downward
direction.
Press clamping element (B) downwards/inwards and remove.
RA Replacing clamping element for front cup holder
BMW AG - TIS
08.02.2013 09:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -