X Series E53 X5 4.4i (M62) OFFRD
51 22 170
Removing and installing/replacing outside
handle on left or right back door
Remove cover on outside handle.
Removal:
Slacken nut (1) on outside handle (2) (do not release fully).
Installation:
Contact surface (3) of outside handle (2) must rest without play
against lock actuator (4).
Tightening torque 51 22 5AZ.
Note:
Fit the older outer frame (1) of screw cover (damage to paint).
Pull outside handle (2) as far outwards/upwards as possible and
secure in this position with a screwdriver (3).
Note:
For removal, the outside handle (1) must remain secured with a
screwdriver (3).
A
Pull off outside handle (1) from rear lock actuator (2).
B
Pull off outside handle (1) in lowest setting (as shown in
illustration) from front lock actuator (4).
RA Removing and installing/replacing outside handle on left or right back door
BMW AG - TIS
08.02.2013 09:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -