X Series E53 X5 4.4i (M62) OFFRD
51 22 180
Removing and installing/replacing cover on
outside handle, left or right
Lever out trim (1) and frame (2).
Note:
After releasing screw, you must reinstall frame (2) (damage
to paint).
Installation:
Install new trim (1) and frame (2).
Release screw (1).
Removing cover (1) on outside handle:
A
Pull cover (1) approx. 1 ... 2 mm towards rear.
B
Take off cover (1).
Lever out catches (1) and detach cover (2) from filler element (3).
Installation:
Catches (1) on cover (2) must not be damaged.
RA Removing and installing/replacing cover on outside handle, left or right
BMW AG - TIS
08.02.2013 09:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
