bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing All Trims For Rear Lid Upper Section > < 2 RA Removing And Installing_replacing Side Trim For Rear Lid Upper Section
Page 1
background image

51 49 056

Removing and installing/replacing upper trim
for rear lid upper section

Special tools required:

00 9 317

Remove side trim for rear lid upper section.

With special tool  00 9 317 , unclip clips (1) in upper trim (4).

Feed trim (4) with swallow-tail guides (2) out of side trim (3).

Installation:

If necessary, detach clips (1) from trim (3) and insert in rear lid.

Swallow-tail guides (2) must not be damaged.

RA  Removing and installing/replacing upper trim for rear lid upper section

BMW AG - TIS

08.02.2013  10:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing All Trims For Rear Lid Upper Section > < 2 RA Removing And Installing_replacing Side Trim For Rear Lid Upper Section