X Series E53 X5 4.4i (M62) OFFRD
51 49 090
Removing and installing/replacing trim for
rear lid lower section
Remove cover for loading sill.
Remove insert for trim on rear lid lower section.
Raise cover (1) and release screws (2).
Release screws (3) and remove trim (4).
Installation:
If necessary, replace faulty retainers (1) and rubber parts (2) on
rear lid lower section (3).
Replacement only:
Remove insulating mat (1) from old trim (2) and insert in new trim.
RA Removing and installing/replacing trim for rear lid lower section
BMW AG - TIS
08.02.2013 10:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
