X Series E53 X5 4.4i (M62) OFFRD
52 17 030
Removing and installing/replacing backrest
frame on left or right front seat (comfort)
Remove backrest cover at bottom.
Caution!
Do not under any circumstances turn screw underneath screw
(2), this would destroy the seat frame.
Press backrest cover (1) to one side and release screw (2) on left
and right.
Detach backrest frame (3) with backrest cover upwards.
Installation:
Replace screws (2) (microencapsulation).
Tightening torque, refer to 52 10 2AZ
.
End of partial operation:
Removing and installing backrest frame
Following operation:
Replacing backrest frame.
Completely remove backrest cover and padding.
If necessary, remove lumbar cushion on front seat.
If necessary, remove valve housing for front lumbar support.
If necessary, remove drive unit for lumbar support.
If necessary, remove shaft for head restraint adjustment
Remove drive unit for head restraint adjustment.
If necessary, remove gearing for head restraint adjustment.
If necessary, remove valve housing for lumbar support.
RA Removing and installing/replacing backrest frame on left or right front seat (co
BMW AG - TIS
08.02.2013 11:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
