X Series E53 X5 4.4i (M62) OFFRD
Detach cover all around by levering out piping (1).
Detach trim wire (1) from rear panel.
Replacement, "padding":
Note clip positions.
Cut through or bend open all clips, remove remnants of clips from
cover and padding.
Installation:
Lock new clips by bending with special tool 52 0 050.
Replacement only, "backrest cover":
Remove all trim wires from cover.
Cut new cover and insert the trim wires.
RA Replacing backrest cover for rear seat (through-loading system) on left
BMW AG - TIS
08.02.2013 11:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
