X Series E53 X5 4.4i (M62) OFFRD
General information:
Information on assigning the repair connectors are contained in
the DIS under the heading Component and signal information /
pin, fan and solder connectors / connectors from X1... / X18989 -
X18990.
Installation:
The cable ties and foam supports contained in the repair kit are for
securing the repair plugs.
Fit all cut leads of main wiring harness with stop parts. Pin in leads
in accordance with schematic in DIS.
Strip insulation from cable.
Crimp stop parts.
Connect precrimped leads to corresponding plugs (refer to
schematic). Cut off and insulate unpinned leads.
Installation/removal of multiple connector systems.
Replace cable ties that have been cut open.
Installation:
Stick a foam support (1) as illustrated to tail panel.
If necessary, stick a second foam support to subwoofer speaker.
Secure both repair plugs (2) on top of each other using cable
ties (3) from repair kit.
RA Replacing wiring harness at rear
BMW AG - TIS
08.02.2013 12:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
