X Series E53 X5 4.4i (M62) OFFRD
Unclip clip (1).
Loosen screws (2).
Pull heating element cover (3) in direction of arrow out of guide.
Installation:
Make sure guide is correctly seated.
Pull out evaporator temperature sensor (1) in direction of arrow
and set to one side.
If necessary, remove servodrive of footwell flap and footwell
flap (2) in direction of arrow.
Pull out heater element (3) in direction of arrow.
Caution!
Do not bend cooling fins.
If necessary, clean or align cooling fins with fin comb.
RA Replacing heater core (automatic A/C)
BMW AG - TIS
08.02.2013 14:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
