X Series E53 X5 4.4i (M62) OFFRD
65 11 030
Removing and installing / replacing radio
receiver
Necessary preliminary tasks:
•
Remove multi-information display.
Release left and right hexagon socket screws and pull out radio
receiver.
Unlock plug connections and disconnect.
Remove radio receiver.
Note:
When installing a replacement radio, it is necessary, because of
the shortened radio finishers, to stick felt strips on the function
carrier.
If installed without felt strips, the radio will not be exactly seated
and rattling noises may occur.
Vehicles from 5/2002:
The felt strips are already fitted ex works in these vehicles. Build
date must however be checked on vehicle without fail.
Installation:
RA Removing and installing / replacing radio receiver
BMW AG - TIS
08.02.2013 14:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
