X Series E53 X5 4.4i (M62) OFFRD
Removal of seatbelt height adjuster only:
Release screws (1) simultaneously so that seatbelt height adjuster
(2) does not tilt.
Remove seatbelt height adjuster (2).
Installation:
Tightening torque 72 11 12AZ.
Release screw (1).
Unlock inertia reel unit (2) and remove from B-pillar.
Installation:
Ensure coding (3) is correctly seated.
Tightening torque 72 11 14AZ.
Removing belt tensioner:
Warning!
Observe safety precautions for handling airbag modules and
pyrotechnical seat belt tensioners.
Inexpert handling can trigger off the airbag or the belt
tensioner and thus cause injury.
Remove front seat.
Disconnect receptacle housing on seat holder.
Unlock cap (1) and detach.
RA Removing and installing or replacing front left or right safety belt (complete u
BMW AG - TIS
08.02.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -