X Series E53 X5 4.4i (N62) OFFRD
Rotate inlet camshaft in direction of rotation until cam on 1st
cylinder is positioned horizontally as shown in illustration.
Important!
Camshaft bearing caps of cylinders 1 to 4 and 5 to 8 must
not be mixed up.
Note:
Bearing caps of inlet camshaft are marked on cylinder bank 1
to 4 with L E1 to L E5 from inlet side.
Release nuts and remove bearing cap L E1.
Release 8 nuts of bearing bracket (1) from outside to inside.
Clamp special tool 11 9 470 as illustrated in a vice.
RA Removing and installing/replacing rocker arms on right inlet side (N62 from 9/03
BMW AG - TIS
09.02.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -