X Series E53 X5 4.4i (N62) OFFRD
Installation:
Threads of new oxygen sensors are already coated with
Never Seez compound.
If an oxygen sensor is reused, only apply a thin and uniform
coat of Never Seez compound (refer to BMW Parts
Service) to thread.
Oxygen sensor section projecting into exhaust system branch
must not be cleaned or come into contact with lubricant.
Pay attention to cable routing (1) of control sensor (2).
Installation:
Check function of DME.
RA Replacing left oxygen control sensor (N62)
BMW AG - TIS
09.02.2013 11:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -