X Series E53 X5 4.8is (N62-S) OFFRD
11 00 050
Removing and installing engine (N62 / N62TU)
Special tools required:
•
11 0 000
Necessary preliminary tasks:
•
Disconnect negative battery lead.
•
Follow instructions for disconnecting and connecting battery.
•
Both exhaust manifolds remain on engine during removal.
•
BMW ALPINA B7 vehicles:
-
Order parts in accordance with BMW ALPINA
-
If necessary, modify ALPINA-specific parts
Observe specified tightening torque and safety precautions in all
work steps.
Work step
Note:
Lift engine hood into assembly position
Secure engine in installation position with special tool
Remove gearbox
After removing transmission,
secure engine against tilting.
Remove intake filter housing
Remove radiator
Remove radiator lines.
Remove expansion tank.
Remove intake air manifold
Remove heater radiator line.
Unlock engine wiring harness section on control unit and detach.
Wiring harness remains on engine.
Unlock spark plug wiring harness section on control unit and detach.
Wiring harness remains on engine.
Release negative lead on spring strut dome.
Release battery positive lead at positive terminal.
Detach vacuum line and vacuum hose from vacuum pump.
Unlock line on tank venting valve and disconnect.
Remove both oxygen monitor sensors.
RA Removing and installing engine (N62 / N62TU)
BMW AG - TIS
12.02.2013 03:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
