X Series E53 X5 4.8is (N62-S) OFFRD
11 00 050
Removing and installing engine (N62)
Special tools required:
•
11 0 020
•
13 5 281
•
13 5 282
Necessary preliminary tasks:
•
Move engine hood into service position.
•
Disconnect battery negative lead.
Follow instructions for disconnecting and connecting battery.
•
Remove front splash guard.
•
Remove reinforcement plate.
•
Remove exhaust system.
•
Remove transfer box.
•
Remove manual or automatic transmission.
•
Remove right output shaft.
•
Release left output shaft and place to one side.
•
Drain off coolant and dispose of correctly.
•
Release A/C compressor and place to one side.
•
Remove alternator drive belt.
•
Remove intake filter housing with air-mass flow sensor.
•
Remove heat exchanger for transmission from radiator.
•
Remove radiator.
•
Disconnect engine oil pipes.
•
Remove windshield washing reservoir.
•
Remove heater end plate.
RA Removing and installing engine (N62)
BMW AG - TIS
12.02.2013 03:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
