X Series E53 X5 4.8is (N62-S) OFFRD
11 14 141
Replacing radial shaft seal in timing case
cover at bottom (N62/N62TU)
Special tools required:
•
11 9 410
•
11 9 420
Necessary preliminary tasks:
•
Removing hub for vibration damper
Position lever (2) for removing radial shaft seal (1) horizontally
and install special tool 11 9 410 .
Turn lever (2) so that it grips behind radial shaft seal (1).
Turn bolt (3) on special tool 11 9 410 to remove radial shaft
seal (1).
RA Replacing radial shaft seal in timing case cover at bottom (N62/N62TU)
BMW AG - TIS
12.02.2013 03:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
