X Series E53 X5 4.8is (N62-S) OFFRD
Important!
Conrod of cylinder 1 to 4 is installed in direction of travel,
see arrow (1), front.
Conrod of cylinder 5 to 8 is installed in direction of travel,
see arrow (1), rear.
Markings on conrod must be situated on the outside (see
arrows)
Incorrect assembly will result in engine damage.
Apply light coat of oil to connecting-rod bearing shells.
Fit bearing cap so that pairing letters match up.
Install new conrod bolts.
Secure conrod with special tool 00 9 120 .
Tightening torque 11 24 1AZ
.
Assemble engine.
RA Removing and installing/replacing all pistons (N62TU)
BMW AG - TIS
12.02.2013 04:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
