X Series E53 X5 4.8is (N62-S) OFFRD
11 28 010
Replacing alternator drive belt (N62/N62TU)
Special tools required:
•
11 3 340
Necessary preliminary tasks:
•
Remove fan clutch with fan impeller (E65/66)
•
BMW ALPINA B7 vehicles:
-
Remove radial compressor drive belt
Note:
If the drive belt is to be reused:
Mark direction of travel and reinstall drive belt in same direction of
travel.
Pretension belt tensioner slowly and carefully with a Torx socket
as far as it will go and secure with special tool 11 3 340 .
Remove drive belt.
Important!
If contaminated with hydraulic fluid: Replace drive belt.
Put on the drive belt.
Remove special tool 11 3 340 .
Installation:
Check that drive belt is correctly positioned on pulleys.
RA Replacing alternator drive belt (N62/N62TU)
BMW AG - TIS
12.02.2013 04:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
