X Series E53 X5 4.8is (N62-S) OFFRD
Attach special tool 11 9490 to second end of torsion spring.
Support end of torsion spring protected with special tool
11 9 490 on inlet camshaft.
Release screw (1).
Remove torsion spring (1) and special tool
11 9 490 .
Remove intermediate levers and torsion springs of
cylinders 5 to 7 according to the same procedure and set down
in an orderly fashion.
RA Removing and installing/replacing left inlet camshaft (N62 from 9/03 and N62TU)
BMW AG - TIS
12.02.2013 04:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
