X Series E53 X5 4.8is (N62-S) OFFRD
Remove special tool 11 9 190 .
Crank engine at central bolt twice in direction of rotation until
engine returns to firing TDC position of 1st cylinder.
Secure vibration damper with special tool 11 9 190 in firing
TDC position of 1st cylinder.
Place special tool 11 9 461 on inlet camshaft and check timing.
Note:
The timing is correctly adjusted when special tool 11 9 461
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Remove special tool 11 9 461 from inlet camshaft.
Place special tool 11 9 462 on exhaust camshaft and check
timing.
Note:
The timing is correctly adjusted when special tool 11 9 462
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Remove all special tools.
Assemble engine.
RA Adjusting camshaft timing on left side (N62 / N62TU)
BMW AG - TIS
12.02.2013 04:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
