X Series E53 X5 4.8is (N62-S) OFFRD
Rotate eccentric shaft at dihedral head as illustrated in order to
reduce tension on torsion spring (1).
Pretension torsion spring (1) with a cable strap (2) and carefully
fit on roller (3).
Rotate eccentric shaft at dihedral head as shown in illustration
back to minimum stroke position.
Rotate inlet camshaft in direction of rotation until cam on 5th
cylinder points upwards at an angle as shown in illustration.
Install inlet and exhaust adjustment unit on left side.
Install spark plugs on cylinder bank 5 to 8.
Install left cylinder head cover.
Install ignition coils on cylinder bank 5 to 8.
Install servomotor for left eccentric shaft.
Assemble engine.
RA Removing and installing/replacing rocker arms on left inlet side (N62 to 9/03)
BMW AG - TIS
12.02.2013 04:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
