X Series E53 X5 4.8is (N62-S) OFFRD
11 33 517
Removing and installing/replacing rocker
arms on right inlet side (N62 to 9/03)
Special tools required:
•
11 9 470
•
11 9 473
(cylinder bank 1 to 4)
Removal
Removal of rocker arms is described separately from installation.
Remove servomotor for right eccentric shaft.
Remove ignition coils on cylinder bank 1 to 4.
Remove right cylinder head cover.
Remove spark plugs on cylinder bank 1 to 4.
Install inlet and exhaust adjustment unit on right side.
Important!
The inlet camshaft must first be rotated so that when the
bearing bracket is removed the intermediate levers do not slip
out and damage the camshaft.
RA Removing and installing/replacing rocker arms on right inlet side (N62 to 9/03)
BMW AG - TIS
12.02.2013 04:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
