X Series E53 X5 4.8is (N62-S) OFFRD
Place special tool 11 9 461 on inlet camshaft and align inlet
camshaft so that special tool 11 9 461 rests without a gap on
cylinder head.
Fit special tool 11 9 463 , secure screw (1) in thread for oil line
and tighten down by hand.
Note:
When tightening down screw (1), grip camshaft at hexagon head.
Tighten down screw (1) of inlet adjustment unit.
Tightening torque 11 36 16AZ
.
Release screw (1), remove special tools
11 9 463 and
11 9 461 from inlet camshaft.
RA Adjusting camshaft timing on right side (N62 / N62TU)
BMW AG - TIS
12.02.2013 04:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -