X Series E53 X5 4.8is (N62-S) OFFRD
11 37 040
Removing and installing/replacing right
eccentric shaft sensor (N62/N62TU)
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Remove right cylinder head cover
Unfasten screws.
Remove eccentric shaft sensor (1).
Installation:
Read out fault memory of control unit of Digital Motor Electronics
(DME).
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Removing and installing/replacing right eccentric shaft sensor (N62/N62TU)
BMW AG - TIS
12.02.2013 04:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
