X Series E53 X5 4.8is (N62-S) OFFRD
Tightening torque, 11 37 1AZ
.
Note:
Replace bearing shells (1) of needle bearings.
Important!
Bearing shells (1) must be installed in such a way that ends of
bearing shells (1) face each other as shown in illustration.
Insert bearing shells (1) into bearing bracket so that it is secured
in bore (2).
Lubricate bearing shells (1) with engine oil.
Cylinder bank 5 to 8:
Important!
There is a danger of mixing up battery leads:
Machined curvature of eccentric points inwards.
Lever (2) with roller points towards front.
Install eccentric shaft as shown in illustration.
RA Removing and installing/replacing left eccentric shaft (N62 to 9/03)
BMW AG - TIS
12.02.2013 04:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -