bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Coolant Thermostat (N62)|Page 735 > < 1 RA Removing And Installing Or Replacing Fan Clutch (N62)
Page 1
background image

11 53 000

Removing and installing/replacing coolant
thermostat (N62)

Warning!

Danger of scalding!

Only perform these tasks on an engine that has cooled down.

Recycling:

Catch and dispose of drained coolant.

Observe country-specific waste-disposal regulations.

Follow instructions for working on cooling system.

Remove front underbody protection.

Remove coolant drain plug on radiator. Drain and dispose of
coolant.

Unlock plug (1) and remove.

Unlock and detach water hose (2).

Unfasten nut.

Release screws and remove coolant thermostat (3).

RA  Removing and installing/replacing coolant thermostat (N62)

BMW AG - TIS

12.02.2013  04:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Coolant Thermostat (N62)|Page 735 > < 1 RA Removing And Installing Or Replacing Fan Clutch (N62)